Posts Tagged ‘Plywood’
Installing Exterior Sidewall Sheathing & House Wrap
Install a minimum of 7/16” x4’x8’ wafer board or plywood panel sheathing on the complete perimeter of your framed walls. Start your vertical sheathing from a corner, centering the sheet on the first stud under 48”; remove excess. Continue to install sheathing in this method until you reach the next corner; continue this process around ...
Sheathing the Roof
After sub-fascia and rakes have been installed, the next step in continuing your roof structure of your home building is installation of the roof sheathing. Roof sheathing should be a minimum of 9/16” or 5/8” sheathing creates a good structural roof. Using H-clips is highly recommended in all applications. If your rafters have been installed ...
Installing Structural Sub-flooring
One of the most important steps in building your own home is installing the subfloor. A poor grade or substandard material as well as substandard installation of the subfloor will result in failure, as well as poor appearance, of the finished floor covering. 1) Foundation Plate: Install a copper or fiberglass termite shield on top ...
